Satellite Search
Channels Search
Advance Search

Add daily news from TrackSat.com to your site
Home Channel Updates Satellites Packages 3DTV HDTV Live TV (Stream) Live Radio (Stream) Free TV Free Radio Channels Directory Test Reports Master Codes Foot Prints Launches Stream Category FTA Sports About Us
Forum TV Radio Providers --- Satcom Teleport Satellite Operator Internet Providers Satellite Dealers Teletext Satmart Sat World Trouble Shooter FAQ Update Form Search Contact Us
Test Report for Star Sat SR-X6200CU

 
Star Sat SR-X6200CU

From the beginning of satellite TV broadcasting, STAR SAT was and stills a star name in satellite TV reception systems. Established In 1991 with 25 years experience in electronics domain. Successfully introduced STAR SAT brand with its wide range of satellite receivers and equipment biggest range ever in all market.

There are seven buttons on the front panel of SR-X6200CU. The large front panel window display is situated on the left side, which shows the current channel number and time in stand by mode.

The rear panel is equipped with two scart connectors, programmable 12 volt out put, S/PDIF, Serial Interface RS-232 for uploading new receiver software, IF out put and a main power switch for turning on and off the receiver completely.

SR-X6200CU has build in smart card module with CONAX system. By using cards in this system provided by operators, it is possible to watch many scrambled channels coded in this system. The menu supplied with the box is only written in English. SR-X6200CU supports DiSEqC 1.0 and 1.2 protocols. The receiver has the capacity to store 4000 TV and Radio channels.

When you plug in the receiver for the first time, you can see the select language menu on your screen. You can easily select the OSD language. After the language selection, a black screen with the channel information bar that mentions TV channel will appear before you. Here you will have to press the Menu button on the remote control in order to start. English. French, Turkish, Russian, Arabic, Persian, Hungarian, Indonesian, Greek, Albania, Polish, Ukraine, German, Italian, Spanish and Czech are available languages for communication.

The initial installation of SR-X6200CU is very simple, because all the colorful menus will guide you at every step. For a new user, the main menu is very simple. This makes the SR-X6200CU a very special receiver for the satellite hunters. The receiver supports TV format in 4:3 and 16:9. All the local oscillator frequencies for C and Ku-band are preprogrammed. Now that the satellite is selected fro scanning, its time to go on channels search.

Scanning of channels with the up and down keys is fast and responsive. 1410 TV and 375 Radio channels were found in 4 minutes and 25 seconds. After the complete scanning, the receiver first saves the channels. The channel list that is brought with the push of an OK button is very responsive too. The scanned channels can be rename, sort, edit and the most viewed channels can be moved in to the favourite list for easier recall later time. If you want to keep your kids away from adult channels, then there is no worry; you may activate the parental control function.

Manual installation menu is organized in the way for user to install and scan satellites/ transponders easily. In all menus of Manual Installation, real time signal level and quality is displayed all the time for more friendly setting.

Switching from one channel to another is fast. If the selected channel is encrypted, a message confirming this appears that also includes information about the encryption system in use. The picture quality of SR-X6200CU is very good. Pressing the Info button will display the information on the current channel, including channel name, frequency, transponder, satellite and current time.

If you want to see 9 channels at the screen at one time, just press a specified button on the remote control and watch it. When the 9 channels become complete, the first found channel will go on start. While pressing the Zoom button will give a closer picture of your favourite player. The receiver manage the symbolrates starting at the rate of 2.45ms/sec. If some one disturbs you during watching your favourite movie, just press the pause button and receive him, then again watch the movie from where you left it.

The Electronic Programme Guide ( EPG) shows the event information on the current transponder channel by time zone. EPG is divided into weekly mode, daily mode and extend mode. If you are getting bore from the long commercial breaks, there are video games to serve you better here. SR-X6200CU is a special receiver for every day use at home. It has fast channel scanning. The picture quality is worth mentioning.


 

 

Satellite Search
Channels Search     

bluefiled-security-systems-in-uae

Contact Us Packages HD TV Live TV Live Radio Free TV Free Radio Master Codes Launches Forum Search
©Copyright 2001-2002: The contents on this website are copyrighted and can not be used for profit.
Duplicating of these on any other website is prohibited. © Tracksat.com.