Satellite Search
Channels Search
Advance Search

Add daily news from TrackSat.com to your site
Home Channel Updates Satellites Packages 3DTV HDTV Live TV (Stream) Live Radio (Stream) Free TV Free Radio Channels Directory Test Reports Master Codes Foot Prints Launches Stream Category FTA Sports About Us
Forum TV Radio Providers --- Satcom Teleport Satellite Operator Internet Providers Satellite Dealers Teletext Satmart Sat World Trouble Shooter FAQ Update Form Search Contact Us
Test Report for Digital Telecom Digital +2

 
Digital Telecom Digital +2

Viewers are aware of the fact that analogue transmissions will come to an end in 2009 worldwide and it will be hold by digital signals. Such technology promises super-sharp pictures and better sound. The plan also would allocate as much as $1.5 billion for a “converter box” programme to help people with older, analogue TV sets that would lose their signal in the digital era. Consumer advocates say that is not enough money. Consumers who have newer TV sets capable of receiving digital signals would not notice a change when the switch is made in 2009, nor should satellite television viewers and the roughly 26 million households with digital cable. For receiving digital signals, there are unlimited set top boxes in the market and Digital Telecom Digital+2 is top of them.

The front panel of Digital+2 is simple. One can see there five buttons for different functions of the box. There is also a Smart Card Slot on the right side of the box for access to Pay channels. The rear panel of the receiver is equipped with two scart connectors, programmable 12 volt out put, serial interface RS 232 for updating a new receiver software and IF out put. The remote control supplied with the box leaves nothing to say behind.

Digital+2 Receiver has the capacity to store unlimited TV and Radio channels. It supports DiSEqC 1.1 and USALS protocols. The user can communicate with the receiver in English, French, Italian, Albanian, Farsi, Arabic, Deutsch, Russian, Turkish and German languages. After selecting a language, the main menu will welcome you in the next step. The Main Menu has Four Sub-Menus and it will be displayed here on your screen. These Menus are Installation, System Setup, Smart Card and Utility. One may use easily this receiver with each and every kind of antenna system. All the local oscillator frequencies for C and Ku-band are preprogrammed. . It comes preprogrammed with updated satellites from worldwide. One may add more satellites manually. The TV scart connector delivers the TV signals in CVBS format. Digital+2 do not ask for a password for every menu. All the menus are designed attractively.

With Easy Search, you have the possibility to detect the focused satellite and their LNB connecting-port of the DiSEqC. This means that with function the receiver would search the satellite and detect to which port their connected. In order to get more signals, set up the antenna to get the proper signal and then search the channels. After selecting all parameters and language setting, the user enters in the Installation menu. Here you will first select your desired satellite. There will be a complete list of satellites on your screen. There is also a multisatellite search option in this box, where you can scan more than one satellite without any hurdle.

After two minutes and 15 seconds, 1280 TV and 544 Radio channels were searched. It was one of the fastest searches as expected. One should decide if one satellite, one transponder, network and FTA or All channels should be searched for. Quite surprising is its ability to handle SCPC and MCPC signals. For more experienced users, there is also a manual PID entry. In nearly every menu, the video of the current channel is displayed in a window. The scanned channels can be delete, rename, sort and moved to one of the favourite list.

Digital+2 Receiver has the function to show the several channels on the screen at the same time. You can select the picture screen fro 4,9,13 and 16 pictures. The channel name and small pictures will be displayed. It is also important here to mention the Zoom function of the receiver. It will enable you to view closer the on screen picture. EPG information is accessible with the push of a button. The receiver has fast channel switching. Each time when you will change from one channel to another, the programme information will appear for a moment on your screen.


 

 

Satellite Search
Channels Search     

dubaivfm-mobile-shopping-website-in-uae

Contact Us Packages HD TV Live TV Live Radio Free TV Free Radio Master Codes Launches Forum Search
©Copyright 2001-2002: The contents on this website are copyrighted and can not be used for profit.
Duplicating of these on any other website is prohibited. © Tracksat.com.