|HYUNDAI HY-6688 FTA+CI
Mediacom always react very fast to the requirements of new existing markets and changing situations. Iran, Iraq and Afghanistan not needed the high end receiver. The low rates receivers are high in quality and easy to use. The updated markets area always being sought after although the majority do not stand up. Mediacom is introducing a high quality digital satellite receiver for free to air (FTA) as well as pay TV reception. It is not only compatible with single LNB, but also with a multifeed antenna (DiSEqC 1.0) and a motorized antenna (DiSEqC 1.2).
The Hy-6688 is not large in size. The front panel contain the ring buttons. It allows operation and programming directly on the unit. The green display shows the current channel. It can store 4,900 TV and radio channels. There are two slots with CA modules and they are hidden behind a flap.
The rear panel of the receiver is equipped. The link to a TV monitor is provided by a single scart connector. The set of RCA jacks are available for those areas where the signals don’t use scart, video and analogue output. The IF signal is looped through for the connection of a second receiver if needed. One can upload the new software via the serial interface as well as via satellite. Hy-6688 can also be used with older TV sets and for this purpose a modulator is provided.
It works easily with a graphic menu interface. This makes it impossible to do anything wrong. English, Italian, Turkish, Arabic, French, Russian, Spanish and Farsi are available for communication. It contains 25 audio languages and 12 for subtitles. It is compatible with NTSC and PAL signals. The picture format may be setted to letterbox, for find the local oscillator frequency is not a problem. Out of 64 pre-programmed satellites available, 50 are very up-to-date. One can find the channel easily on a satellite with the help of automatic scan. You may scan the all or only the FTA channels in advance. It only not take more than 5 minutes. Bit if you are a more advanced user, then the Hy-6688 can also perform a manual scan with PID entry. The signal quality is show for reference in case of automatic or manual scan. If you are doing scanning second time, the new found channels will be added on the end of the list. The Hy-6688 also contain very sensative SCPC signals starting at 2.0 Ms/Sec. Switching between channels takes a five second. This receiver is one of the faster one. The remote control desired auto tracks. The electronic programme guide (EPG) delivers information about the current as well upcoming programmes. This service can also be used with a TV that does not have its own TT decoder.
One can list his favourite channels while delete the unwanted channels with a parental lock feature available to block the inappropriate channels from kids. One can also list the popular channels in a more logical order and these channels can be quickly recalled only with a push of a button on the remote control. The channel name and time of the programme is shown by info button. While pushing the button for second time, the channel’s technical parameters, PID, frequency symbol rate, polarization and signal strength will be shown. But even as 4,900 channels, if they are not able to watch, then the integrated video games should help you something to do.
The Hy-6688 will find quality and well thought out features even in an inexpensive receiver. The easy graphic menu will always guide you with confidence through all the programming steps even for the beginners too in such a way that it will take only a few minutes. It is very easy to use this receiver.
Digital Satellite Receiver (FTA+CI)
4,900 (Radio + TV)
1.0 / 1.2
MCPC / SCPC Compatible:
Analog Stereo Audio and Video Outputs:
3 x RCA
Digital Audio Output:
PAL, NTSC, AUTO
90-260 VAC, 50/60 Hz
Max, 40 W, Standby: < 6.5 W