Satellite Search
Channels Search
Advance Search

Add daily news from TrackSat.com to your site
Home Channel Updates Satellites Packages 3DTV HDTV Live TV (Stream) Live Radio (Stream) Free TV Free Radio Channels Directory Test Reports Master Codes Foot Prints Launches Stream Category FTA Sports About Us
Forum TV Radio Providers --- Satcom Teleport Satellite Operator Internet Providers Satellite Dealers Teletext Satmart Sat World Trouble Shooter FAQ Update Form Search Contact Us
Test Report for STAR TRACK NC-707 Digital Satellite Receiver

 
STAR TRACK NC-707 Digital Satellite Receiver

The Star Track NC-707 is the new advanced featured digital satellite receiver. The receiver is designed for cable operators and other commercial satellite operations who want to maintain their signal in a digital format. The receiver provide solutions for today’s needs and tomorrow opportunities. NC-707 has a slim design and small size.

The design of NC-707 front panel is very attractive. The four digit display on the left side of the front panel shows the current channel number. There are three buttons on the front panel for operation of the receiver. Since this is a simple FTA receiver, you will not find any CI slots or smart card modules. As simple as the front panel was designed, the rear panel is just as simply laid out. There is an LNB input as well as a looped through output. A set of three RCA jacks provides video and stereo audio outputs. There are two scart connectors for TV and VCR, RS-232 serial interface for the uploading of new receiver software, S/PDIF to audio input of your amplifier and RF-IN (optional). The remote control is very logically designed with curved buttons.

If you are using NC-707 for the first time after connecting, you have to perform basic settings. Once the setup procedure is finished correctly, you can start watching TV or listening to radio services. First you will have to select the menu language. The NC-707 can communicate with you in English, Arabic, German, French, Persian, Turkish, Italian, Greek, Spanish and Russian. The NC-707 is preprogrammed with 53 update satellites from all over the world. 4000 channels may be stored in the receiver without any delay. The LOF values can be set up for C-band and Ku-band LNB’s. DiSEqC 1.0, 1.1 and 1.2 can be set up and the 0/12 volt output can be programmed. There is also USALS protocol for the more comfortable control of DiSEqC motors.

The next step is the automatic channel scanning NC-707 performs a very fast channel scanning. 403 TV and 245 radio channels were found in less than two minutes. It was really a matter of surprise for us. After saving the channels, the receiver turns on the first channel found. Symbolrates starting at the rate of 1.45ms/sec were processed easily. NC-707 is capable of receiving both SCPC and MCPC channels. The receiver switches automatically between PAL and NTSC. The video signals are in CVBS and RGB formate.

Pressing the OK key will bring a channel list on your screen. The channel list is very clearly designed. Press the OK button while watching a programme to display the selected channel, while press the red button to sort the channel list by alphabetical order. While pressing the green button will sort the channel list by FTA/CI order. Switching between channels is very fast. You can display multi-channels window and select a channel to watch. Channels can be lock, delete, more, rename and put into the favourite group for easier recall at a later time. The menu operation of this receiver is overall logically designed and well through out. Unfortunately, the menus sometimes react rather slowly to commands. The Electronic Programme Guide (EPG) delivers information for on-screen channel. After a channel change, an info bar appears providing information on the current channel. The NC-707 comes with its own teletext decoder. The manual search will brought those channels left behind from automatic scanning. Advanced search is also possible. Pressing the zoom button will let you closer at your favourite actor picture. NC-707 is based on window 95/98 and 2000.

The NC-707 from Star Track is an easy to use family receiver. Its compact design allows it to be placed almost anywhere in your TV cabinet.

Model : NC-707 Function : Digital FTA Satellite Receiver Channel Memory : 4000 Satellites : 53 Symbolrates : 1.45ms/sec DiSEqC : 1.0, 1.1, 1.2 USALS : Yes S-VHS output : No SCPC/MCPC : Yes EPG : Yes Color System : PAL/NTSC Website : www.worldofsatellite.com


 

 

Satellite Search
Channels Search     

dubaivfm-mobile-shopping-website-in-uae

Contact Us Packages HD TV Live TV Live Radio Free TV Free Radio Master Codes Launches Forum Search
©Copyright 2001-2002: The contents on this website are copyrighted and can not be used for profit.
Duplicating of these on any other website is prohibited. © Tracksat.com.