Satellite Search
Channels Search
Advance Search

Add daily news from to your site
Home Channel Updates Satellites Packages 3DTV HDTV Live TV (Stream) Live Radio (Stream) Free TV Free Radio Channels Directory Test Reports Master Codes Foot Prints Launches Stream Category FTA Sports About Us
Forum TV Radio Providers --- Satcom Teleport Satellite Operator Internet Providers Satellite Dealers Teletext Satmart Sat World Trouble Shooter FAQ Update Form Search Contact Us
Test Report for PREMIUM X Digital Satellite Receiver

PREMIUM X Digital Satellite Receiver

Now-a-days digital satellite receivers can search for channels in several different ways like network scan, blind scan or transponder data update. Depending on the selection a user makes in the install menu, the receiver may discover more or few channels. The premium X satellite receiver is one of the special receiver with the different menu in the market. It is most famous in Germany, Russia and now coming in Middle East.

The front panel of the receiver is nicely designed. Behind a flap on the front panel are the cutouts for the CI slots. The window display, which is situated in the middle of the receiver shows the current channel number. Incase the remote control is not immediately at hand, the most critical functions of the receiver can be controlled by the receiver’s front panel buttons. The rear panel is a familiar sight: one IF input with looped through output, one scart connector, RCA Jacks for video and audio output, an optical digital audio output, on RS-232 interface as well as a programmable 0/12 – volt output are there to be found. The remote control site nicely in your hand with buttons easy to reach. This receiver left us with a very positive impression.

After turning on the receiver for the first time, the receiver greets you by an installation assistant that first ask us you for the proper OSD language. The Premium X comes with an international selection of languages including English, German, French, Polish, Spanish, Italian, Persian, Arabic, Norwegian, Swedish, Dutch and Danish. The receiver supports the DiSEqC 1.0, 1.2 and USALS protocol, so it can be easily used with a motorized antenna.

If one is not satisfied with the list of preprogrammed channels, you can simply go into the installation menu and add more satellites as well as start an automatic or manual channel scan. 70 satellites are preprogrammed with up-to-data. 4000 channels are already stored in the receiver. The automatic channel scan of 80 transponders was completed in just four minutes. For the first time without searching, you can see the channel when you are setting the antenna. It is very good way for check that all of your setting is right. You can scan for only FTA channels, CAS or CAS-only channels. This receiver has the ability to find channels that are not on transponder list. This receiver has excellent and best picture quality. For experts, there is also the capability to enter in PID data in the manual scan mode. Symbolrates starting at the rate of 2.45 ms/sec were processed easily during our tests. The sensitive tuner is able to work with weaker signals. The receiver is fully SCPC and MCPC compatible. The video signal is delivered by the receiver in PAL or NTSC. The video signals are in CVBS and RGB formate.

You can set date and time in local time and you can use more benefit from this setting. Because some of the channel like Action and Multivision have EPG information. When you press EPG button, you can see the time for starting and end of the film in your local time and also preserve the next film. After the film start, receiver come back automatic to the reserve channel. Time can be set for turning on and off. This is good choice for special in model PVR, because you can easily record the film. Selection of previous and current service is too much easy.

Channels can be renamed, deleted, moved or transferred into one of the favourite list for easier recall later time. Channels not suitable for kids can be locked out with a pin code. There is also one option in parental control called age rating. Some of the channels give information about age rating and this choice help to parents that prevent kids to watch bad channels. The receiver accept all of the original cards. Most of the Embedded receiver have problem with orginal card and usually freeze after working. This receiver usually make active original card same as IRDETO and Viaccess CAM. This receiver also work good with ART and Showtime card. It has multicam and working with all system irdeto / viaccess / seca / conax / nagravision / cryptoworks and mediaguard. Switching between channels is fast. The channel list does not disappear when switching between channels. You would have to rpess the Exit button to get rid of it. The receiver find the channel with alphabet from the remote. The subtitle language may be selected directly. Premium X is the best receiver for managing code and full auto update all system. If your favourite movie is interrupted by a telephone call, it can be paused and then restarted from the point it was stopped at the end of the telephone conversation. Integrated video games are also included just in case you want to keep yourself occupied during long commercial breaks.

Easy use of this receiver and well-illustrated user manual will help you to support Premium X receiver. Model : Premium X Function: Digital Satellite Receiver Channel Memory : 4000 Satellites : 70 Symbolrate : 2.45 ms/sec DiSEqC : 1.0, 1.2 USALS : Yes Scart Connector : 1 Color System : PAL, NTSC C/Ku-band compatible : Yes SCPC / MCPC Compatible: Yes EPG : Yes RS-232 : Yes Teletext : Yes Digital Audio Output : Yes



Satellite Search
Channels Search     


Contact Us Packages HD TV Live TV Live Radio Free TV Free Radio Master Codes Launches Forum Search
©Copyright 2001-2002: The contents on this website are copyrighted and can not be used for profit.
Duplicating of these on any other website is prohibited. ©