Satellite Search
Channels Search
Advance Search

Add daily news from TrackSat.com to your site
Home Channel Updates Satellites Packages 3DTV HDTV Live TV (Stream) Live Radio (Stream) Free TV Free Radio Channels Directory Test Reports Master Codes Foot Prints Launches Stream Category FTA Sports About Us
Forum TV Radio Providers --- Satcom Teleport Satellite Operator Internet Providers Satellite Dealers Teletext Satmart Sat World Trouble Shooter FAQ Update Form Search Contact Us
Sat Mart

The DC SAT MART is published regularly in the DISH CHANNELS monthly magazine.
February 2004
 





Semi Modular Head-Ends for MATV and SMATV:

K series is designed to process Digital and Analogue Signals in a SMATV system. K series is designed to be used in pose press in Multi dwelling units, Estate, Hotels. It is complaint with digital programs (DTT receiver). It has the ability to manage compels channels plans. The KTP LCD programmer allows modules to be easily adjusted. The modules are quick fitted on the DIN BAR. It may be used with the standard Din Bar as well as mount rall. By using one broadband amplifier for all the modules (with KF range). Modules are single channel modules, which integrate filter and amplifier. By using KF, K120 or K120A modules, you can process each channel independently. It is fully complaint with digital terrestrial television. It is also fully complaint with adjacent channels. It has high selectivity to compensate up to 15-db gaps between two adjacent channels. It has automatic gain control on K120A. It ensure the signal output level if the off air signal fluctuates. To convert digital or analogue channel, the product can also be used as filter with the same channel at the input and at the output. The product has a VHF and UHF input and a full band agile output. The product allows to convert digital channels in the whole Bandwidth.


TQ-511 QPSK-QAM Transmodulator for Digital Channels 912 Series:

QPSK-QAM transmodulator, each module converts a DVB-S digital satellite channel into a digital DVB-C cable TV channel. Different types of programmable QAM modulations. The QAM output channel contains the same TV programmes as the input transponder. The product complies with requirements of the low voltage directive 73/23/ECC and the EMC directive 89/336/EEC and their relevant amendments, gathered under the directives 93/68/FEC.


DTR-800/T Professional COFDM DVB-T Monitoring Receiver:

DTR-800/T professional digital terrestrial COFDM DVB-T monitoring receiver with embedded conditional access system. MFN and SFN (QPSK, 16 or 64 QAM), MPEG-2 fully compliant, available in three versions: single, double or up to 3 audio, video and TXT programs simultaneously. Features: frequency range: 170-230 / 470-862 MHz, 1 unit 19" rack assembly, up to 3 conditional access readers, up to 20 bouquets and more than 100 storable programs, direct access to the stored bouquet or programs, wide menu of signals measurements and threshold settable alarms based on measurements. Measurements: field power, BER (before and after Viterbi), SNR/MER, guard interval, unlock demodulator, counter monitoring, FEC, spectrum status (normal or reversed), receiver temperature. Superb PAL-SECAM-NTSC audio/video quality, no.2 isolated video outputs (for each program), balanced stereo audio output, no.1 base band output, radio on-screen graphics, ASI output (optional), PDU redundancy (optional).


SRT 5000T Digital Terrestrial Receiver:

SRT 5000T digital terrestrial receiver signal without a dish, easiest access to free to view digital TV, interactivity with FA cup, Quiz Shows and much more, no subscription required, easy installation - (no dish or cable), easy to use menu, 22 free to view digital terrestrial channels, interactive services from BBC and ITV, easy and fast access to watch sport, movies, news etc., MHEG5 compatible, widescreen and digital audio output, select channels as your favourite channels, new video and audio experience, electronic program guide, fully DVB-T compliant.


DA 353 Distribution Amplifier:

The SABAL series of amplifiers has been specially designed for distribution of TV signals - up to 862 MHz or 2300 MHz -. Designed to work under adverse weather conditions, their circuit is integrated in a Zamak box, which ensures correct operation of the amplifier. The DA 353 and WBA 433 models allow return path operation and have slope control for the direct way. Try to bend the coax cable too sharply. Be sure that the F connectors are tightly connected. The test points have to be used in order to see the quality of the signal, but to deduct the out put level. Always connect the amplifier to the earth through the specific earth screw. Never take out the back cover, when the amplifier is connected through the main plug.


IF-IF Converter:

IF converter allows distribution of digital satellite channels in IF band through only one coaxial cable, distributing 4x8 cables for 1 or 2 satellites with IF to IF converters. We make a selection up to 30 transponders to be distributed with one coaxial cable. ALCAD's IF-IF Converter allows implementing IF distribution systems. Each module can process two transponders. In case that both transponders are in the same polarity, the UC-202 unit is needed, but in case that every transponder comes in a different polarity, the UC-212 unit allows us processing both of them in the same module. The digital satellite bouquets have a main transponder in which there is a network information. This NIT is a list of all the transponders of the bouquet with their frequency, polarity and band. Some digital satellite receivers use this NIT to store all the data of the bouquet.


SDM 6000/SDM 7000 Digital-Analog Transmodulator:

The SDM 6000 / SDM 7000 module is a transmodulator specially designed for the reception of free Digital Satellite TV channels, and for their subsequent distribution together with the rest of the terrestrial channels and analog satellite via a single cable. Fagor's SDM demodulates the QPSK signal and outputs a channel selectable by the installer, so that the programmes may be directly received by a television set. With this new module, Fagor has incorporated the conversion of Digital Satellite TV signals on PAL TV channels to its Multi-processing Headend System, and these channels will be distributed via the community antenna network. The SDM is 100% compatible both electrically and mechanically with the rest of the modules of the SCM 6000/ SCM 7000 System.


FGS-8800 Digital Free to View SDTV Recorder:

DVR digital video recorder, 30 Hours recording with 40GB hard disk, auto EPG & schedule playback, recording, support MP3 / MPEG file download, video image capture as slide show, live video pause without time limited, full function playback & repeat, wakeup mail remind and multi-language menu support. It has an antenna loop through with auto scan worldwide channel table. It has also multi-language OSD support. It has the full function box-to-box upload/download software. The live channels may be pause with out space limited. It has fast forward and rewind and slow playback. Recording current channel while playing earlier recorded simultaneously is its extraordinary character. It has Full function play & repeat mode.


CS-8700 DVR digital satellite receiver:

DVR digital video recorder has 20 Hours recording with 40GB hard disk, auto EPG & schedule playback, recording support MP3 / MPEG file download, video image capture as slide show, live video pause without time limited, 2 CI slot support for CAM module, excellent signal receiving, multi-language menu support. It has antenna loop through with Auto scan worldwide satellite table. It has Multi-language OSD support with Auto TV output: PAL / NTSC / AUTO. It has Embeded Teletext decoding & VBI support week EPG. It has also 24-Event VCR Timer recording / replay with EPG recording recervation. 20-Hour recording with 40GB HDD and live channel pause without space limited.


WBA 433 Wide Band Amplifier:

The SABAL series of amplifiers has been specially designed for distribution of TV signals - up to 862 MHz or 2300 MHz -. Designed to work under adverse weather conditions, their circuit is integrated in a Zamak box, which ensures correct operation of the amplifier.The DA 353 and WBA 433 models allow return path operation and have slope control for the direct way. They have been designed with full band technology and have professional mechanics. With a robust design to ensure the correct operation of the amplifier under adverse conditions. It offers a linear response and excellent matching both in the return and the distribution band.


FireTV Digital Satellite Receiver for PC

The FireTV receiver box is a Digital Video Broadcast receiver that connected to the host computer across the IEEE 1394. The FireTV accepts the digital television broadcast signals from the satellite defined by the DVB specification. The source signal of the FireTV is directly from the parabola aerial, by the FireTV's advanced design and high transmission capability the digital video is able to be processed (including still picture capture, demuliplexing, decoding and rendering of the MPEG-2 transport streamand teletext viewing) on the host computer easily. It has high speed internet access through the satellite and user friendly interface. It has the automatic scanning for the favourite channels. It is supported by remote control and teletext.The programme may recorded by the Hard Desk in MPEG-2 format.


 

 

Satellite Search
Channels Search     

Contact Us Packages HD TV Live TV Live Radio Free TV Free Radio Master Codes Launches Forum Search
©Copyright 2001-2002: The contents on this website are copyrighted and can not be used for profit.
Duplicating of these on any other website is prohibited. © Tracksat.com.